English - 11
Changing the Input Source
¦
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB
satellite receiver connected to the TV.
■
19”, 22” : TV / Ext. / PC / HDMI/DVI / AV / Component / USB
■
26”, 32” : TV / Ext. / PC / HDMI1/DVI / HDMI2 / AV / Component / USB
✎
In the Source List, connected inputs will be highlighted.
✎
If you want to see connected devices only, move to
Connected
using
◄
or
►
button.
✎
Ext.
and
PC
always stay activated.
✎
If the connected external devices are not highlighted, press the red button. The TV will search for
connected devices.
¦
Edit Name
How to use Edit Name
In the Source, press the
TOOLS
button, and then you can set an external input sources name you want.
■
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices /
TV / IPTV / Blu-ray / HD DVD / DMA
: Name the device connected to the input jacks to make your input source selection
easier.
■
26”, 32”
✎
When connecting a PC to the
HDMI IN 1(DVI)
port with HDMI cable, you should set the TV to
PC
mode under
Edit Name
.
✎
When connecting a PC to the
HDMI IN 1(DVI)
port with HDMI to DVI cable, you should set the TV to
DVI PC
mode under
Edit
Name
.
✎
When connecting an AV devices to the
HDMI IN 1(DVI)
port with HDMI to DVI cable, you should set the TV to
DVI Devices
mode
under
Edit Name
.
■
19”, 22”
✎
When connecting a PC to the
HDMI / DVI IN
port with HDMI cable, you should set the TV to
PC
mode under
Edit Name
.
✎
When connecting a PC to the
HDMI / DVI IN
port with HDMI to DVI cable, you should set the TV to
DVI PC
mode under
Edit Name
.
✎
When connecting an AV devices to the
HDMI / DVI IN
port with HDMI to DVI cable, you should set the TV to
DVI Devices
mode
under
Edit Name
.
Information
You can see detailed information about the selected external device.
Connecting to a COMMON INTERFACE slot
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
y
If you do not insert the “CI or CI+ CARD,” some channels will display the
message “Scrambled Signal”.
y
The pairing information containing a telephone number, the “CI or CI+ CARD”
ID the Host ID and other information will be displayed in about 2~3 minutes. If
an error message is displayed, please contact your service provider.
y
When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated.
✎
NOTE
x
You must obtain a “CI or CI+ CARD” from a local cable service provider.
x
When removing the “CI or CI+ CARD”, carefully pull it out with your
hands since dropping the “CI or CI+ CARD” may cause damage to it.
x
Insert the “CI or CI+ CARD” in the direction marked on the card.
x
The location of the
COMMON INTERFACE
slot may be different depending on the model.
x
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
* It may differ depending on the model.
[LD450-XN ZF]BN68-03394E-L04.indb 11
2011-03-07 �� 3:52:06
