background image

English-29

Checking the Signal Information

Upgrading the Software (Option)

You can get information about the signal status.

1. 

Press the 

D.MENU 

button to display the DTV menu.

2. 

Press the   or   button to select "System", then press the 

ENTER

 button.

3. 

Press the   or   button to select "Signal Information", then press the 

ENTER

 button.

4. 

Press the 

EXIT

 button to exit.

 

If the signal status is poor, the "No signal." message is displayed.

To keep your product up-to-date with new Digital Television features then software upgrades 
are periodically broadcast as part of the normal Television signal. 
It will automatically detect these signals and display the software upgrade banner. You are 
given the option to install the upgrade.

Upgrade Now

If you select "Upgrade Now", the "iDTV" immediately installs the new upgrade and then restarts.

Upgrade Later
 

If you select "Upgrade Later", the upgrade is postponed until the next restart or channel change  

 

some 90 minutes later, when the upgrade dialog appears again.

Don’t Upgrade
 

If you select "Don’t Upgrade", the "iDTV" does not perform the upgrade and the software upgrade  

 

banner is not displayed again. 

 

The upgrade is still stored internally, to subsequently upgrade to the new version then the  

 

 

following sequence of steps are performed.

1. 

Press the 

D.MENU 

button to display the DTV menu.

2. 

Press the   or   button to select "System", then press the 

ENTER

 button.

3. 

Press the   or   button to select "Software Upgrade", then press the 

ENTER

 button.

4. 

To switch to an alternative version, press the red button.

 

Press the blue button to reset, activate the upgrade and restart.

5. 

Press the 

EXIT

 button to exit.

BN68-01096A-00Eng.indd   29

BN68-01096A-00Eng.indd   29

2006-08-08   

 9:59:33

2006-08-08   

 9:59:33

Содержание LA26R7













































Отзывы: