Samsung KM24A Скачать руководство пользователя страница 70

Страница: 70 / 80

Check the followings.

Installation issue (PC mode)

The screen keeps switching on and off.

Check that the cable between the product and the PC is connected correctly.

Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.

The blank spaces found on the screen have nothing to do with the product.

Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem,

adjust the screen size in the HDMI or DVI settings for the graphics card.

If the graphics card settings menu does not have an option to adjust the screen size, update the

graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to

adjust the screen settings.)

Screen issues

The power indicator is off. The screen will not switch on.

Make sure that the power cord is connected.

Weak

No Signal

is displayed on the screen.

Check that products (including source device) are connected correctly with a cable.

Check that the source device connected to the product is powered on.

Depending on the type of external device, the screen may not display properly. In this case,

connect it with the

HDMI Hot Plug

function turned

Not Optimum Mode

is displayed.

This message is displayed when a signal from the graphics card exceeds the product's

maximum resolution and frequency.

Refer to the "Preset Timing Modes" and set the maximum resolution and frequency according

to the product specifications.

The images on the screen look distorted.

Check the cable connection to the product.

The screen is not clear. The screen is blurry.

Set the resolution and frequency to the recommended level.

The screen appears unstable and shaky.

Check that the resolution and frequency of the PC and graphics card are set within a range

compatible with the product. Then, change the screen settings if required by referring to

"Preset Timing Modes".

There are shadows or ghost images left on the screen.

The power indicator may not be
supported depending on the
model.

Содержание KM24A

















































































Результаты поиска

Содержание KM24A

Отзывы:

Похожие инструкции для KM24A

Бренды по названию

Популярные бренды

Samsung KM24A, Руководство пользователя

Результаты поиска

Содержание KM24A

Отзывы:

Похожие инструкции для KM24A

Бренды по названию

Популярные бренды