APPENDIX
Cleaning and maintenance
NOTE
• If you washed the Dustbin and filter with water
– Dustbin: Completely wipe out the water.
– Filter: Completely dry it in the shade before use.
• Do not use water to clean the Fine dust Filter, just shake it to clean.
• If suction power decreases continuously, or the Jet Bot overheats, clean
the Fine dust Filter.
CAUTION
• Watch your fingers when attaching or detaching the filter, since they may
get stuck in the Dustbin’s intake.
• To avoid blockages by foreign matter, do not let the Jet Bot vacuum up
toothpicks, cotton swabs, etc.
• If it is difficult to remove foreign matter from the brush, contact an
authorized SAMSUNG service center.
• Since the brush sweeps dirt up from the floor during cleaning, foreign
matter such as a thin and long thread, long hair, etc. may get caught in it.
For the best cleaning results, check and clean it regularly.
• Only the Upper Cover, Lower Cover, and Pre-motor Filter can be detached
from the Dustbin.
– Be careful not to get injured when disassembling or revamping the
Dustbin.
• Turn off the Jet Bot before cleaning or maintenance work.
• If a brush or a brush cover is not assembled correctly after the
maintenance work, scratches may occur on the floor, or product
malfunction may occur. Therefore, assemble them correctly by checking
the maintenance method.
English
36
VR9500_EN_00846J-02_SA.indd 36
2022-10-12 오후 10:46:31
