OPERA
TION
Charging the Jet Bot
Before using the Jet Bot for the first time, charge it completely. (For the charging time and
cleaning time, refer to the ‘Product specification’.)
OFF
ON
1
Remove the yellow gasket attached to the
power switch at the side of the Jet Bot and
press the power switch to turn the Jet Bot
on.
– During booting, the Jet Bot’s Status
Indicator turns on with a melody which
stops when the booting is complete.
– When you turn the Jet Bot on for the
first time after purchase, check the
SmartThings App connection (refer to
p.29-33) and installation of the Clean
Station following the voice guide of the
Jet Bot.
2
Place the Jet Bot on the Clean Station
manually to start charging.
– Make sure the charging terminals on the
Jet Bot and the Clean Station are aligned.
– When the Jet Bot starts charging, the
Status Indicator of the Clean Station turns
white and after 1 minute, the Status
Indicator turns off automatically.
Status
Indicator
3
Check the charging status.
– When charging starts, the Status
Indicator of the Jet Bot turns on (red,
orange, or yellow depending on charging
progress), it rises gradually, and changes
to green when the charging is complete.
OPERATION
English
14
VR9500_EN_00846J-02_SA.indd 14
2022-10-12 오후 10:46:09
