setup screen
86_
setup screen
Specify an operation that will perform if an alarm occurs.
Alarm output1 / Alarm output2 : Select whether to set the alarm output if an alarm
is incoming, and specify the alarm output time.
E-mail sending : Specify the use of email transfer in the alarm input setup.
Record : Specify the use of recording in the alarm input setup.
Goto Preset : Moves to the specified preset location when setting the alarm input.
When done, click [
Apply (
)
].
VA / MD
From the Setup menu, select the
<
Event (
)
> tab.
Click <
VA / MD
>.
To set the Motion Detection
Select a motion detection mode.
Specify the use of motion detection.
Select a sensitivity level of the motion
detection.
Place the cursor at a point in the video
and drag it to whatever you need.
You can specify up to 4 motion detection
areas.
Specify the activation time and
activation condition.
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”.
(page 85)
When done, click [
Apply (
)
].
If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion
sensor may not work.
5.
•
•
•
•
6.
1.
2.
1.
2.
3.
4.
5.
6.
J
