Samsung iPolis SNM-128S Скачать руководство пользователя страница 15

Страница: 15 / 109

User's Manual

(Chart: Unit Explorer Icons)

Icons Description

A folder that contains registered units.

A sub folder under a registered unit; you can add sub folders under a registered

unit for management.

Failed to connect a non-hard disk unit.

Failed to login to a non-hard disk unit.

Logged in to a non-hard disk unit.

Alarmed unit: when an alarm is activated, the target icon blinks red for 5 seconds.

Unit under watch; every video channel of the target unit is under watch.

Logged into a hard disk unit (DVR).

Failed to login to a hard disk unit (DVR).

Alarmed unit: when an alarm is activated, the target icon blinks red for 5 seconds.

Failed to connect to a hard disk unit (DVR).

Video channel status: displays if the status of the video channels of each unit is

normal.

Selected video channel status; displays when a specific video channel is under

watch and the status of the video channels of each unit is normal.

Sensor action: displays in blue if the sensor is off.

Sensor action: displays in red if the sensor is on.

Relay Out: off.

Relay Out: on.

Mike: displays when the mike is working properly.

Mike: displays when the mike is currently in use.

A registered screen layout.

Event: displays if an event occurs in a unit under a registered screen layout.

Map.

2.1.1.2 Main

View

Displays the monitor screen and map window of a selected mode.

2.1.1.3 Event

View

Event History displays the real-time situation of an event happening in a unit that is registered

under My Unit.

Status & Action displays the event situation of each unit, and enables control of the relay output

and audio output devices.

is to hide windows or drag and dock the title bar.

Содержание iPolis SNM-128S














































































































Результаты поиска

Содержание iPolis SNM-128S

Отзывы:

Бренды по названию

Популярные бренды

Samsung iPolis SNM-128S, Руководство пользователя

Результаты поиска

Содержание iPolis SNM-128S

Отзывы:

Бренды по названию

Популярные бренды