Samsung iPolis SND-3082, Руководство пользователя

Страница: 93 / 136

to use motion detection
It detects a motion that meets all conditions specified by size and area.
1. Select < Size > tab.
You can limit the minimum/maximum
size of motion to be detected.
• Minimum size : To set the minimum
size of detected motions, select
desired minimum size on the screen.
• Maximum size : To set the maximum
size of detected motions, select
desired maximum size on the screen.
J
` Motions smaller than the specified
minimum size or bigger than the
maximum size are not detected. To avoid
unintended detections caused by great
and small noises, set minimum/maximum
motion sizes appropriately in accordance
to your environments.
Note that same motions on the same
location can be differently detected in
their detection size; it is recommended
to consider and include the tolerable
difference when setting the minimum/
maximum detection sizes.
2. Select < area > tab.
You can specify an area on the screen to exclude the area from detection.
You can specify up to 4 areas.
• Non detection area : Sets the entire screen as motion detection area, and
excludes specified area as not to be detected. Use your mouse to drag to specify
preferred area as the non detection area.
3. To delete an area, right click on the screen to open popup context menu and select
Delete, and [ oK ] button.
J
`
All areas defined are deleted.
4. When done, click [ apply ( ) ].
English _93
●
Setup
Screen