Samsung Infuse 4G, Руководство пользователя, Страница: 106 / 205

101
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
1. From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings .
2.
Tap WPS button connection .
3.
Press the WPS button on your Wi-Fi access point within 2
minutes.
Mobile AP
You can use your phone as an Internet AP (Access Point) using
Mobile AP. This allows other devices (maximum of 5) to connect
to it via Wi-Fi. The Internet will be available on connected devices
to share your 3G network.
Important!: A Tethering/Mobile Hotspot is required to use this service. Please
go to
www.att.com/myWireless or dial 611 if you do not already
have this service provisioned.
To set up Mobile AP, follow these steps:
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Mobile AP .
2.
Tap Mobile AP to make a checkmark and activate the
feature.
3. If Wi-Fi is activated, tap Yes to deactivate it.
4.
Tap Mobile AP settings to configure the following options:
• Network SSID : the ID number that Identifies your wireless network.
• Security : select Open or WPA2 PSK.
• Password : allows you to set a password for credential storage.
• Hide my device : tap to create a checkmark if you want your device
hidden.
Connecting to Mobile AP from other devices.
1. Activate Wi-Fi on the device that wants to connect to your
phone.
2.
Find [AndroidAPxxxx] in the Wi-Fi network list and connect
to it (xxxx are the last four digits of your phone number).