67
Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Select
Open Network Settings
. The
Open Network Settings
session starts.
2
The network test screen appears and verifies the network connection.
When the connection has been verified, the “
Your TV is connected to the Internet.
If you
have any problems using online services, please contact your internet service provider.
”
message appears.
―
If the connection process fails, check the LAN port connection.
― If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Open Network Settings
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the
Support
tab.
4
On the
Support
Tab, click the
Details
button. The Network connection values are
displayed.
How to set up manually
1
Select
Open Network Settings
. The
Open Network Settings
session starts.
2
The network test screen appears and the verification process starts. Press
Stop
. The
verification process stops.
3
Select
IP Settings
on network connection screen. The
IP Settings
screen appears.
4
Select the field at the top, press
E
, and then set
IP Settings
to
Enter manually
. Repeat
the entry process for each field in the
IP Address
.
―
Setting
IP Settings
to
Enter manually
automatically changes
DNS Setting
to
Enter
manually
.
5
When done, select
OK
at the bottom of the page, and then press
E
. The network test
screen appears and the verification process starts.
6
When the connection has been verified, the “
Your TV is connected to the Internet.
If you
have any problems using online services, please contact your internet service provider.
”
message appears.
