Samsung iES4028F, Руководство по управлению

Страница: 385 / 712

System Management Commands
4-49
4
Command Mode
Normal Exec, Privileged Exec
Example
To show all lines, enter this command:
Event Logging Commands
This section describes commands used to configure event logging on the switch.
logging on
This command controls logging of error messages, sending debug or error
messages to switch memory. The
no form disables the logging process.
Syntax
[ no ] logging on
Default Setting
None
Console#show line
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Login timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
VTY configuration:
Password threshold: 3 times
Interactive timeout: 600 sec
Login timeout: 300 sec
console#
Table 4-14 Event Logging Commands
Command Function Mode Page
logging on Controls logging of error messages GC 4-49
logging history Limits syslog messages saved to switch memory based on
severity
GC 4-50
logging host Adds a syslog server host IP address that will receive logging
messages
GC 4-51
logging facility Sets the facility type for remote logging of syslog messages GC 4-51
logging trap Limits syslog messages saved to a remote server based on
severity
GC 4-52
clear log Clears messages from the logging buffer PE 4-53
show logging Displays the state of logging PE 4-53
show log Displays log messages PE 4-55