02 RECORDING
33
RECORDING_
Selecting the self-timer
1. Select a Recording mode with the exception
of Voice recording mode. (p.19)
2. Press the SELF-TIMER / RIGHT (
✢
) button
until the desired mode indicator is displayed
on the LCD monitor. A 10 second, 2 second,
Double self-timer or Motion timer icon appears
on the LCD monitor.
3. When you press the SHUTTER button, the
picture will be taken after the speci
fi
ed time
has elapsed.
Self-timer (
✢
) / Right button
[Selecting the 10 SEC
self-timer]
Self-timer mode indecator
Icon
Mode
Description
✢
10SEC
self-timer
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
✡
2SEC
self-timer
Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
✣
Double
self-timer
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
Motion
Timer
The camera detects the subject's movement 6
seconds after pressing the Shutter button, and the
picture is taken when the movement is stopped.
When the menu is displayed on the LCD monitor, pressing the Right but-
ton makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer (
✢
) button. This function is used when the
photographer would also like to be in the image.
If you operate the Self-timer button during the self-timer operation,
the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
In Movie Clip mode, only the 10SEC self-timer will work.
When you select 2SEC self-timer with
fl
ash, the delay (2 seconds)
can be extended according to the
fl
ash charging status.
Содержание I80
