ENG - 22
11 SOFTWARE
UPDATE
Auto Update
When the Soundbar is connected to the Internet,
software updates automatically occur even when
the Soundbar is turned off.
•
To use the Auto Update function, the
Soundbar must be connected to the Internet.
The Wi-Fi connection to the Soundbar will be
terminated if the Soundbar’s power cord is
disconnected or the power is cut off. If the
power is cut off, when the power comes back
on or you reconnect the power cord, turn on
the Soundbar, and then reconnect it to the
Internet.
USB Update
Bottom of the Soundbar
Micro USB to
USB adapter Cable
(not supplied)
SERVICE
DC 19V
HDMI
(ARC)
DIGITAL AUDIO IN
(OPTICAL)
ID SET
NETWORK
SERVICE
Samsung may offer updates for the Soundbar’s
system firmware in the future.
When an update is available, you can update the
Soundbar by connecting the USB drive that
contains the update firmware to the
SERVICE
port of the Soundbar.
For more information about how to download
update files and upgrade the version, go to the
Samsung Electronics website
(www.samsung.com) → search for the model
name from the customer support menu option.
Initialisation
5 Sec
With the Soundbar on, press the
(Volume)
buttons on the body at the same time for at least
5 seconds. The LED display changes as shown
below and then the Soundbar is initialised.
LED
Indicator
Cyan Blinks X3
“
The factory reset is complete.
”
CAUTION
•
All the settings of the Soundbar are
initialised. Be sure to perform this only when
initialisation is required.
