ENG - 28
If the device fails to connect
•
If you have an existing Soundbar (e.g.,
[AV] Samsung Soundbar Q850T
) on the list of speakers
on the Samsung TV, delete it.
•
Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the
(Multi Function)
button at the top of the Soundbar or the
(Source)
button on the
remote control to select the mode other than “
BT”
.
•
Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
What is the difference between BT READY and BT PAIRING?
•
BT READY
: In this mode, you can reconnect any Samsung TV or mobile device that was
connected before.
•
BT PAIRING
: In this mode, you can connect a new device to the Soundbar.
(Press the
PAIR
button on the Soundbar remote control or press and hold the
(Mic On/Off)
button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “
BT
” mode.)
Notes on Bluetooth connection
•
Locate a new device within 3.28 ft (1 m) to connect via Bluetooth communication.
•
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•
The Soundbar automatically turns off after 18 minutes in the Ready state.
•
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–
If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
•
Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
