ENG - 18
4. Check if the LINK LED is solid blue (connection complete)
STANDBY
LINK
STANDBY
LINK
Blue is On
The LINK LED indicator stops blinking and glows a solid blue when a connection
is established between the Soundbar and the Wireless Receiver Module.
5. If the SWA-9100
does not connect, take the necessary steps according to the LED Indicator’s status
LED status
Action
LINK (Blue)
On
Connected with the Soundbar
-
Blinking
Connection standby status
Check if the Soundbar is turned on
Repeat steps 3 through 4.
STANDBY (Red)
On
Connection failure
Check if the Soundbar is turned on
1.
Press the
ID SET
button on the back of the Wireless
Receiver Module with a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
POWER
ID SET
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
5 Sec
2.
Repeat steps 3 through 4.
Others
-
Errors
Contact a Samsung Service Center.
