ENG - 17
Disconnecting the Soundbar from the TV
Press the
button on the right side panel or on the remote control and switch to any mode but
“
Bluetooth
”.
•
Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
•
To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold
button for 5 seconds in “
Bluetooth
” mode. TV Connect is turned OFF.
•
To turn TV Connect back on, press and hold the
button for 5 seconds with the Soundbar in
“
Bluetooth
” mode.
•
TV Connect is set to ON by default.
Mode
Remote control Button
LED indicator
TV Connect-OFF
5 Sec
B W W
R
Blinking
TV Connect-ON
5 Sec
B W W
G
Blinking
NOTES
– If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
– In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
– The Soundbar automatically turns off after 5 minutes in the Ready state.
– The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–
If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
– Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
– The Soundbar supports SBC data (44.1kHz, 48kHz).
– Connect only to a Bluetooth device that supports the A2DP (AV) function.
– You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)
function.
