ENG - 20
ENG - 21
2.
Align the Paper Template’s
Centre Line
with
the centre of your TV (if you are mounting
the Soundbar below your TV), and then fix
the
Wall Mount Guide
to the wall using tape.
•
If you are not mounting below a TV, place
the
Centre Line
in the centre of the
installation area.
Centre Line
450mm
3.
Use a sharp object, such as a pen or pencil, to
mark the holes’ positions, and then remove
the
Wall mount Guide
.
450mm
CENTER LINE
4.
Using an appropriately sized drill bit, drill a
hole in the wall at each marking.
•
If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the
holes before you insert the support
screws. If you use anchors or mollies,
make sure the holes you drill are large
enough for the anchors or mollies you
use.
5.
Push a screw (not supplied) through each
Holder-Screw
, and then screw each screw
firmly into a support screw hole.
6.
Install the 2
bracket-Wall Mounts
in the
correct orientation on the bottom of the
Soundbar, using 2
Screws
.
•
When assembling, make sure the hanger
part of the
bracket-Wall Mounts
are
located behind the rear of the Soundbar.
rear of Soundbar
right end of Soundbar
7.
Install the Soundbar with the attached
bracket-Wall Mounts
by hanging the
bracket-Wall Mounts
on the
Holder-Screws
on the wall.
8.
Slide the Soundbar down as shown below so
that the
bracket-Wall Mounts
rest securely
on the
Holder-Screws
.
•
Insert the
Holder-Screws
into the wide
(bottom) part of the
bracket-Wall
Mounts
, and then slide the
bracket-Wall
Mounts
down so that
bracket-Wall
Mounts
rest securely on the
Holder-Screws
.
Содержание HW-MS650
Страница 1: ...HW MS650 HW MS651 USER MANUAL...