ENG - 16
ENG - 17
09 InStaLLInG tHe WaLL Mount
Installation Precautions
•
Install on a vertical wall only.
•
Do not install in a place with high temperature or humidity.
•
Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall
or choose another installation point.
• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster
board, iron board, wood, etc.). If possible, fix the support screws into wall studs.
•
Purchase wall mounting screws according to the type and thickness of the wall you want to mount
the Soundbar on.
– Diameter: M5
– Length: 35 mm or longer recommended.
•
Connect cables from the unit to external devices before you install the Soundbar on the wall.
•
Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an
electric shock.
Wallmount components
CENTER LINE
A
B
B
A
A-TYPE : 616mm
B-TYPE : 360mm
Wall Mount Guide
Holder-Screw (2 ea)
Screw (2ea)
bracket-Wall Mount L
bracket-Wall Mount r
1.
Place the
Wall Mount Guide
against the wall
surface.
•
The
Wall Mount Guide
must be level.
•
If your TV is mounted on the wall, install
the Soundbar at least 5 cm below the TV.
5 cm or more
2.
Align the Paper Template’s
center Line
with
the center of your TV (if you are mounting
the Soundbar below your TV), and then fix
the
Wall Mount Guide
to the wall using tape.
•
If you are not mounting below a TV, place
the
center Line
in the center of the
installation area.
center Line
CENTER LINE
A
B
B
A
A-TYPE : 616mm
B-TYPE : 360mm
3.
Push a pen tip or sharpened pencil tip
through the center of the
b-tyPe
images on
each end of the Guide to mark the holes for
the supporting screws, and then remove the
Wall Mount Guide
.
CENTER LINE
A
B
B
A
A-TYPE : 616mm
B-TYPE : 360mm
B
CENTER LINE
4.
Using an appropriately sized drill bit, drill a
hole in the wall at each marking.
•
If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the
holes before you insert the support
screws. If you use anchors or mollies,
make sure the holes you drill are large
enough for the anchors or mollies you
use.
5.
Push a screw (not supplied) through each
Holder-Screw
, and then screw each screw
firmly into a support screw hole.
Содержание HW-M360
Страница 1: ...HW M360 USER MANUAL...
