Samsung HW-M360, Руководство пользователя

Страница: 13 / 52

ENG - 8 ENG - 9
auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the (Source) button on the right side panel or on the remote control, and then select
“ D.In ”.
3. Press the Left button on the remote control for 5 seconds to turn Auto Power
Link on or off.
• Auto Power Link is set to ON by default.
(To turn off this function, turn off Auto Power using the Soundbar.)
• Depending on the connected device, Auto Power Link may not function.
• This function is only available in the “ D.In ” mode.
Method 2. connecting Wirelessly
connecting a tV via bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
the initial connection
1. Press the (Source) button on the right side panel or on the remote control, and then select
“ bt ”.
2. Change “ bt ” to “ bt PaIrInG ”.
• If “ bt reaDy ” appears, press and hold the (Source) button on the right side panel of the
Soundbar or on the remote control for more than 5 seconds to display “ bt PaIrInG ”.
3. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)
4. Select “ [aV] Samsung Soundbar Mxxx M-Series ” from the list on TV’s screen.
An available Soundbar is indicated with “ need Pairing ” or “ Paired ” on the TV Bluetooth device list.
To connect to the Soundbar, select the message and establish a connection.
• When the TV is connected, “[ tV name ] → “ bt ” appears on the Soundbar’s front display.
5. You can now hear TV sound from the Soundbar.
If the device fails to connect
• If the previously connected Soundbar listing (e.g. “ [aV] Samsung Soundbar Mxxx M-Series ”)
appears in the list, delete it.
• In “ bt ” mode, press and hold the (Source) button for more than 5 seconds on the right side
panel of the Soundbar or on the remote control to switch to “ bt PaIrInG ” mode.
Then, select “ [aV] Samsung Soundbar Mxxx M-Series ” from the TV’s search list.
What are the bt reaDy and bt PaIrInG statuses?
• bt reaDy : In this mode, you can search for previously connected TVs or connect to the Soundbar
from a previously connected mobile device.
• bt PaIrInG : In this mode, you can connect to a new device. (While in “ bt ” mode, press and hold the
(Source) button for more than 5 seconds on the right side of the Soundbar or on the remote
control.)
noteS
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
• The Soundbar automatically turns off after 5 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the tV
Press the (Source) button on the right side panel or on the remote control and switch to any mode
but “ bt ”.
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)