· 16 · English
2.
Align the Paper Template's
Centre Line
with the
centre of your TV (if you are mounting the
Soundbar below your TV), and then fix the
Wall
Mount Guide
to the wall using tape.
c
If you are not mounting below a TV, place the
Centre Line
in the centre of the installation area.
Centre Line
C TYPE : 700mm
CENTER LINE
C
C
3.
Push a pen tip or sharpened pencil tip through the
centre of the
C-TYPE
images on each end of the
Guide to mark the holes for the supporting
screws, and then remove the
Wall Mount Guide
.
4.
Using an appropriately sized drill bit, drill a hole in
the wall at each marking.
c
If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the holes
before you insert the support screws. If you use
anchors or mollies, make sure the holes you drill
are large enough for the anchors or mollies you
use.
CENTER LINE
C
C TYPE : 700mm
CENTER LINE
C
C
5.
Push a screw (not supplied) through each
Holder-Screw
, and then screw each screw
firmly into a support screw hole.
6.
Install 2
Bracket-Wall Mounts
in the right
orientation on the bottom of the Soundbar, using
2
Screws
(M4 x L12)
●
When assembling, make sure the hanger parts
of the
Bracket-Wall Mounts
are located
behind the rear of the Soundbar. See the
illustration below.
Rear of the Soundbar
Right end of the Soundbar
