28
FUNCTIONS
●
The Soundbar supports SBC data (44.1kHz, 48kHz).
●
Connect only to a Bluetooth device that supports the a2DP (aV) function.
●
you cannot connect the Soundbar to a Bluetooth device that supports only the Hf (Hands free) function.
●
once you have paired the Soundbar to a Bluetooth device, selecting "
[aV] Samsung Soundbar Kxxx
"
from the device's scanned devices list will automatically change the Soundbar to
Bt
mode.
-
available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth
device and the Soundbar must have been previously paired at least once.)
●
Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying
Bt Pairing
.
tO DiSCOnneCt a BLUetOOtH DeViCe frOM tHe
SOUnDBar
you can disconnect a Bluetooth device from the Soundbar. for instructions, see the Bluetooth device's user manual.
●
The Soundbar will be disconnected.
●
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
Bt DiSCOnneCteD
on the front display.
tO DiSCOnneCt tHe SOUnDBar frOM a BLUetOOtH
DeViCe
Press the
SOUrCe
button on the remote control or the
button on the product's right side to switch from
Bt
to
another mode or turn off the Soundbar.
●
The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
●
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 32.8 ft.
●
The Soundbar automatically turns off after 5 minutes in the ready state.
+
More about Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a
short wireless connection.
●
a Bluetooth device may cause noise or malfunction, depending on usage, if:
-
a part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the
Soundbar.
-
It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
-
It is exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless Lans.
●
Pair the Soundbar with the Bluetooth device while they are close together.
●
The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
●
In poor reception areas, the Bluetooth connection may not work properly.
●
The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the
Bluetooth device is out of range. even within range, the sound quality may be degraded by obstacles such as
walls or doors.
●
This wireless device may cause electric interference during its operation.
