15
14
CONNECTIONS
●
●
Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
●
●
Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SUBWOOFER AND SWA-
7000S TO THE MAIN UNIT
CONNECTING THE SUBWOOFER AND SWA-7000S AUTOMATICALLY
The linking IDs of the SWA-7000S wireless module and the subwoofer are preset at the factory. The subwoofer and
the SWA-7000S should link (connect wirelessly) to the main unit automatically when you turn on the main unit, the
subwoofer, and the SWA-7000s.
•
When the subwoofer and SWA-7000S are completely connected, the blue LED Link indicators on the subwoofer
and the SWA-7000S stop blinking.
CONNECTING SUBWOOFER AND SWA-7000S MANUALLY
If the blue LED lights do not stop blinking when the main unit, subwoofer, and SWA-7000S are turned on, please reset
the linking ID by following the procedure below.
1.●
Plug the power cords of the main unit, subwoofer, and SWA-7000S into an AC wall outlet.
2.●
Press the
ID SET
button on the back of the subwoofer and the SWA-7000S with a small, pointed object for 5
seconds.
•
The STANDBY indicator turns off and the LINK indicator (Blue LED) blinks quickly.
3.●
While the main unit is powered off (in STANDBY mode), press and hold the
(Mute) on the remote control for 5
seconds.
4.●
The
ID SET
message appears on the Soundbar's display.
5.●
To finalize the link, turn the main unit’s power on while the blue LEDs on the subwoofer and the SWA-7000S are
blinking.
•
The main unit, subwoofer, and SWA-7000S should now be linked (connected).
•
The Link indicators (Blue LEDs) on the subwoofer and SWA-7000S should be glowing continuously. They
should not be blinking.
•
If the Link Indicators are not solid blue, the linking process has failed. Turn off the main unit and start
again from Step 2.
CONNECTIONS
CONNECTIONS
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
ID SET
L
R
HW-J470 EN ENG-0311.indd 14
2015/3/24 9:04:32
