39
ENG
●
SETUP
SETTING THE TEST TONE
Use the test tone to check the speaker connection status or level.
Press the
SETUP/MENU
button.
Each time the button is pressed, the mode switches between
SETUP
ENTER
and
SETUP OFF
.
Press the
ENTER
button to select
SETUP ENTER
.
Press the ▲▼ buttons to select
TEST TONE
, and then press the
ENTER
or ► button.
Press the ▲▼ buttons to select the option you want, and then press the
ENTER
or ► button.
AUTO
: Test signal will be automatically output as follows; F.L
Æ
CEN
Æ
S.W
Æ
F.R
Æ
S.R
Æ
SBR
Æ
SBL
Æ
S.L.
- During test tone output, press the
▲▼
buttons to adjust the speaker
output level from -10 to +10 dB by 1 step.
MANUAL
: Enables you to adjust the output level of the speaker
manually.
1) Press the
ENTER
button to select the speaker you want.
Each time you press the
ENTER
button, F.L
Æ
CEN
Æ
S.W
Æ
F.R
Æ
S.R
Æ
SBR
Æ
SBL
Æ
S.L will be selected in turn.
2) Press the ▲▼ buttons to set the Test Tone mode you want.
You can adjust the speaker output level from -10 to +10dB by 1 step.
The sound gets quieter at -10dB and louder at +10dB.
- Test Tone Output -
• F.L (front left) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
• S L (surround left) : -10 ~ +10dB
• SBL (surround back left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
• SBR (surround back right) : -10 ~ +10dB
- To stop test tone -
Press the
SETUP/MENU
button once.
SETUP OFF
appears on the display and test tone stops.
In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows : F.L
Æ
FHL
Æ
CEN
Æ
S.W
Æ
FHR
Æ
F.R
Æ
S.R.
1.
•
2.
3.
4.
•
•
•
M
Æ
Æ
Æ
Æ
HW-C700-C770S-C770BS-XAA_0609.in39 39
HW-C700-C770S-C770BS-XAA_0609.in39 39
2010-06-09 5:07:36
2010-06-09 5:07:36