background image

ENG - 4

7. 

Do not block any ventilation openings.  
Install in accordance with the manufacturer’s 
instructions.

8. 

Do not install near any heat sources such as 
radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce 

heat.

9. 

Do not defeat the safety purpose of the 
polarized or grounding-type plug.  
A polarized plug has two blades with one 
wider than the other. A grounding type plug 
has two blades and a third grounding prong. 
The wide blade or the third prong are 
provided for your safety. If the provided plug 

does not fit into your outlet, consult an 

electrician for replacement of the obsolete 
outlet.

10. 

Protect the power cord from being walked 
on or pinched particularly at plugs, 
convenience receptacles, and the point 
where they exit from the apparatus.

11. 

Only use attachments/accessories specified 

by the manufacturer.

12. 

Use only with the cart, stand, 
tripod, bracket, or table 

specified by the manufacturer, 

or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to 
avoid injury from tip-over.

13. 

Unplug this apparatus during lightning 
storms or when unused for long periods of 
time.

14. 

Refer all servicing to qualified service 

personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

PRECAUTIONS

1. 

Ensure that the AC power supply in your 
house complies with the power 

requirements listed on the identification 

sticker located on the bottom of your 
product. Install your product horizontally, on 
a suitable base (furniture), with enough 

space around it for ventilation (3~4 inches). 

Make sure the ventilation slots are not 

covered. Do not place the unit on amplifiers 

or other equipment which may become hot. 
This unit is designed for continuous use.  
To fully turn off the unit, disconnect the AC 
plug from the wall outlet. Unplug the unit if 
you intend to leave it unused for a long 
period of time.

2. 

During thunderstorms, disconnect the AC 
plug from the wall outlet. Voltage peaks due 
to lightning could damage the unit.

3. 

Do not expose the unit to direct sunlight or 
other heat sources. This could lead to 
overheating and cause the unit to 
malfunction.

Содержание HW-C400








































Отзывы: