GB
CONNECTIONS
19
HDMI Function
Why use HDMI (High Definition
Multimedia Interface)?
This device transmits a DVD
video signal digitally without
the process of converting to
analog. You will get sharper
digital pictures when using
an HDMI connection.
In Stop mode, press and hold the
SD/HD
(Standard Definition/High Definition)
button on the remote control.
■
Resolutions available for the HDMI output are 576p(480p), 720p and 1080i.
■
SD(Standard Definition) resolution is 576p(480p) and HD(High Definition) resolution is 720p/1080i.
Resolution Selection
• If the TV does not support the configured resolution, you will not be able to see
the picture properly.
• When an HDMI cable is connected, composite and component video signals are not
output.
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
This function allows the user to select the screen resolution for HDMI output.
1
Connect the main unit of the Home Theater to a Samsung TV with an HDMI
cable. (See page 18)
2
Set the function on your TV.
(See the TV instruction manual for more information.)
■
You can operate the Home Theater by using the TV remote control.
(Available TV buttons :
, , , ,
,
and
,
buttons,
~
button)
Set the (HDMI-CEC) to <On> on your TV.
■
<
Receiver : On
> : You can listen to audio through the Home Theater.
■
<
Receiver : Off
> : You can listen to audio through the TV.
Select <
THEATER to connector
> and set the option of each items below.
■
<
View TV
> : If (HDMI-CEC) set to on and you select View TV, the Home Theater will
automatically switched to DIGITAL IN.
■
<
THEATER Menu
> : You can access the Home Theater menu.
■
<
THEATER Operation
> : The Home Theater disc playback information will be displayed.
■
<
Receiver : On
> : You can listen to audio through the Home Theater.
■
<
Receiver : Off
> : You can listen to audio through the TV.
Using (HDMI-CEC)
is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, can be used
by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support .
• The Theater function is available only when you listen to the audio through
the Home Theater with the digital optical cable connected.
• If (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.
• (HDMI-CEC) will only work while in the DVDmode.
If you select the TV
If you select the THEATER
With
You can operate this unit,
power on your TV, or watch a
movie by pressing the Play
button on your Samsung TV's
remote control.
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
Choose one of the four methods for connecting to a TV.
Connecting the Video Out to your TV
18
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
METHOD 4 : Composite Video ....... (Good Quality)
If your television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on
the back panel of the main unit to the SCART IN jack on your television.
METHOD 3 : Scart ....... (Better Quality)
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input
jacks on your TV.
COMPONENT SELECT Function
1. With the main unit turned off, press and hold the
COMPONENT SEL.
button on the remote control for over 5 seconds.
• <Y Pb Pr> and<RGB> will appear in the display.
2. Press the
COMPONENT SEL.
button shortly to select <Y Pb Pr> to set the main unit to COMPONENT mode.
METHOD 2 : Component Video ....... (Better Quality)
METHOD 4
(supplied)
METHOD 2
METHOD 3
METHOD 1
1. With the main unit turned off, press and hold the
COMPONENT SEL.
button on the remote control for over 5 seconds.
• <Y Pb Pr> and<RGB> will appear in the display.
2. Press the
COMPONENT SEL.
button shortly to select <RGB> to set SCART mode.
VIDEO SELECT Function
Press and hold the
VIDEO SEL.
button on the remote control for over 5 seconds.
• <COMPOSITE> or <RGB> will appear in the display. At this time, press the
VIDEO SEL.
button shortly to select between
<COMPOSITE> and <RGB>.
• If Scart (RGB Input) is equipped for your TV, press the
VIDEO SEL.
button to select RGB mode.
You can get a better picture quality by using Scart setting.
• If Scart (RGB Input) is not equipped for your TV, press the
VIDEO SEL.
button to select COMPOSITE mode.
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN
jack on your TV.
METHOD 1 : HDMI ....... (Best Quality)
• This product operates in Interlace scan mode (576i, 480i) for component output.
•
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate
the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs
that support (HDMI-CEC).
•
Please check the logo (If your TV has an logo, then it supports the function.)
X30_TX35(1~39P) GB 2007.3.8 1:00 PM Page 18
