22
- English
Settings
Radio Setup
~
To listen to the radio, you must connect the
supplied FM antenna.
Operating the Radio with the Remote Control
1.
Press the
SOURCE
button to select
FM
.
2.
Tune to the desired station.
~
Preset Tuning 1 : Press the
PRESET
button
to select
PRESET
, and then press the
78
buttons to select a preset station.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory.
~
Manual Tuning : Press the
PRESET
button
to select
MANUAL
, and then press the
78
buttons to tune to a lower or higher frequency.
~
Automatic Tuning : Press the
PRESET
button
to select
MANUAL
, and then press and hold
the
78
buttons to automatically search the
band.
Selecting Mono or Stereo
Press the
ST/MO
button.
~
Each time you press the button, the sound
switches between
STEREO
and
MONO
.
~
In a poor reception area, select
MONO
for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory.
1.
Press the
SOURCE
button to select
FM
.
2.
Press the
78
buttons to select <89.10>.
3.
Press the
MEMORY
button.
~
NUMBER flashes on the display.
4.
Press the
MEMORY
button again.
~
Press the
MEMORY
button before NUMBER
disappears from the display on its own.
~
After you press the
MEMORY
button,
NUMBER disappears from the display and the
station is stored in memory.
5.
To preset another station, repeat steps 2 to 4.
~
To tune to a preset station, press the
PRESET
button to select
PRESET
, and then press the
78
buttons to select the preset station.
Recording FM Radio
You can record your favorite radio broadcast on a
inserted USB storage device.
1.
Insert a USB device into the USB jack on the
front of the product.
2.
Press the
SOURCE
button to select
FM
, and
then then press the
78
buttons to select the
station you want to record.
3.
Press the
A
(Red) button to start recording the
radio broadcast. Recording begins.
~
The recorded time is displayed on the left and
the recording time still available, based on
the amount of free space in the USB storage
device, is displayed on the right.
4.
Press the
e
(
EXIT
) button to finish your
recording. The recording is stopped and saved
as an .mp3 file at the same time. To play the
recorded file, refer to "Playing Files on a Storage
Device".
✎
The recorded file is saved in the
Tuner
folder which
is created automatically.
✎
Only the
(
OPEN/CLOSE
),
(
POWER
),
e
(
EXIT
),
(
MUTE
), and
VOL +
/
-
, buttons are
operable while FM radio is being recorded.
✎
If you don't press any buttons while recording, the
screen saver will be enabled.
✎
Sound effects, such as DSP, EQ, etc., are not
recorded during FM radio recording.
✎
The radio is recorded at a set, default volume
even if you change the volume or press the
(
MUTE
) button during the recording process.
✎
If you remove the USB device or Power Cable
during the recording process, the portion of the
file which has already been recorded may not play
back.
✎
Recording will not start if the remaining free space
in the USB storage device is less than 2MB.
✎
If the USB device is removed or has insufficient
space (under 2MB), the appropriate message is
displayed and the recording stops.
HT-J7500W_J7750W-XU-ENG-0114.indd 22
HT-J7500W_J7750W-XU-ENG-0114.indd 22
2015-01-14 4:17:47
2015-01-14 4:17:47
