22
CONNECTIONS
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
Connecting the FM and AM Antennas
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the
FM 75
Ω
COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM ter-
minal. (Keep the AM loop antenna con-
nected).
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM Antenna (supplied)
AM Loop Antenna
(supplied)
If AM reception is poor, connect an out-
door AM antenna(not supplied).
21
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Analog signal components such as a VCR or TV.
Press AUX on the remote control to select ‘DIGITAL IN / AUX1 / AUX 2’.
•
Each time the button is pressed, the selection changes as follows:
DIGITAL IN
➝
AUX 1
➝
AUX 2
.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows:
DVD/CD
➝
DIGITAL IN
➝
AUX1
➝
AUX2
➝
FM
➝
AM
.
Connecting External Components
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
1
3
DIGITAL OUT
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Connecting an External Digital / Analog Component
Optical Cable
(not included)
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.