26
25
CONNECTIONS
Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal.
1
Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
2
VIDEO IN
ANYNET
TERMINAL
Other AV devices
Samsung DVD player
Samsung VCR
Samsung Set-Top Box
Use this to connect
Anynet-enabled AV
devices when necessary.
How to Connect to Anynet
Using an Anynet-enabled TV, you can control the DVD Home Theater System and any other
Samsung Anynet-enabled AV
device.
For detailed operation instructions and connection
diagram, refer to the user's manual of your Anynet-enabled TV.
What is Anynet?
•
The Anynet function allows you to use your
Samsung
TV's remote control and menu to control all AV devices.
•
However, this function is available only with Samsung Anynet-enabled models.
Refer to the user's manual of your Anynet-enabled TV and activate the Anynet function.
3
*
This function is available only with Anynet-enabled TVs.
•
If the Anynet input and output terminals are reversed, communication with the TV will fail and
you will not be able to use the Anynet function.
Caution
The cooling fan
sup
p
lies
cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
Connecting the FM and AM Antennas
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the FM
75
Ω
COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
1
2
3
FM Antenna (supplied)
AM Loop Antenna
(supplied)
If AM reception is poor, connect an
outdoor AM antenna(not supplied).