CONNECTIONS
20
19
Connecting the Video Out to TV
You can adjust the resolution switch to set the HDMI and component (P
R
, P
B
, Y) output resolution to
576p(480p)/720p/1080i.
Example: If the TV supports resolution up to 576p(480p)
•
If you connect the HDMI and Component outputs (P
R
, P
B
, Y) at the same
time, Component output resolution changes automatically to the
designated HDMI resolution.
Caution
Selecting Resolution
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
DCDi
(Directional Correlational Deinterlacing)
Function
Set the resolution switch to 576p(480p).
•
A 576p(480p) video signal is output through the HDMI and component outputs (P
R
, P
B
, Y).
1
•
If copy protection is in place, output resolution is automatically converted to 576p(480p) when you play the
DVD, even if you set the resolution to 720p or 1080i.
Note
Press and hold
DCDi
button on the remote
control for over 3 seconds.
•
Each time the button is pressed, the selection alternates between
DCDi ON
and
DCDi OFF
.
