18
English
Connections
Speaker Components
CENTRE
SUBWOOFER
SPEAKER CABLE
SURROUND
(L) (R)
Installing the Speakers on the Tallboy Stand
Turn the Stand Base upside-down and connect
it to the Stand.
Insert small screws (4x20, For connecting Stand
& Stand Base) clockwise into the four holes
marked using a screwdriver as shown in the
illustration.
CAUTION
When you use a torque screwdriver, be careful
not to put excessive force. Otherwise, it runs
idle or can be damaged. (torque screwdriver-
below 15 kg.f.cm)
Insert the large screw (5x15, For connecting
Stand & Stand Base) clockwise into the hole on
the rear of the stand using a screwdriver.
Connect the upper Speaker to the assembled
Stand.
Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the
rear of the speaker using a screwdriver.
This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
1.
2.
!
3.
4.
5.
6.
SWA-5000
Wireless Receiver Module
TX Card
Speaker Cable (2EA)
STAND BASE
SCREW (4x20): 16EA
SCREW (5x15): 6EA
FRONT/FRONT TOP
(L) (R)
STAND
2
Stand
Stand Base
1
3
6
5
Stand
Speaker
4
or
HT-D6750W_ELS_1227.indd 18
HT-D6750W_ELS_1227.indd 18
2011-12-27 9:24:59
2011-12-27 9:24:59