18
English
Connections
Installing the Speakers on the Tallboy Stand
HT-D4550 only
Turn the Stand Base upside-down and connect it to
the Stand.
Insert small screws (4x20, For connecting Stand &
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
CAUTION
When you use a torque screwdriver, be careful not to
put excessive force. Otherwise, it runs idle or can be
damaged. (torque screwdriver- below 15 kg.f.cm)
Connect the upper Speaker to the assembled Stand.
Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the rear
of the speaker using a screwdriver.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
1.
2.
!
3.
4.
5.
Speaker Components
Assembled Speakers
CENTRE
STAND
STAND BASE
SCREW (5X15): 4EA
SCREW (4X20): 16EA
SPEAKER CABLE
SUBWOOFER
FRONT
SPEAKER
FRONT
(L) (R)
SUBWOOFER
SURROUND
(L) (R)
CENTRE
SPEAKER
SURROUND
SPEAKER
HT-D4550
HT-D4550
Speaker Components
(L)
(R)
FRONT
SURROUND
CENTRE
SUBWOOFER
(L)
(R)
HT-D4500
4
2
3
1
5
Stand
Speaker
Stand
Stand
Base
HT-D4500_ELS_1223.indd 18
HT-D4500_ELS_1223.indd 18
2011-12-23 3:58:29
2011-12-23 3:58:29