English
27
02
Connections
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Connect the black wire to the black terminal(-), connect the wire
wearing a colored band to the red(+) terminal, and release the tab.
Connect the connecting plugs to the back of the Subwoofer by
matching the colours of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the back of the Subwoofer.
Hold the TX card so that the label "WIRELESS" faces leftward and
insert the card into the port.
The TX card enables communication between the product and the
wireless receiver module.
Connect the left and right surround speakers to the wireless receiver
module.
Plug the power cord of the wireless receiver module in the wall outlet.
Turn on the product. The product and wireless receiver module will
now communicate with each other and you will hear sound from the
Surround speakers.
1.
2.
3.
4.
•
•
5.
6.
7.
TX card
Attaching the Toroidal Ferrite Core to the Speaker Cable
Open the smaller ferrite core by pulling up
the tab.
Arrange up the speaker cables that are
connected to the FRONT L (+,-) terminal
before making 3 loops of them.
Attach the ferrite core to the arranged
cables and press to close it until you hear a
click.
Insert the ferrite core as close to the sub
woofer as possible.
Follow steps 1 through 3 above and insert
the ferrite core to each speaker cable that is
connected to any of the FRONT R (+,-) and
CENTER (+,-) terminals of the sub woofer.
Make 3 loops of the speaker cables that are
connected to the REAR L and REAR R
terminals of the wireless receiver (SWA-
5000) and insert the smaller ferrite core in
the same way as step 3 above.
1.
2.
3.
•
4.
5.
<SWA-5000>
HT-C9950W_ELS_0914.indd 27
HT-C9950W_ELS_0914.indd 27
2010-09-14 6:54:53
2010-09-14 6:54:53
