English
25
02
Connections
Stretch out the speaker cable and get it through as shown.
NOTE
When installing the front and surround speakers, match the label
colour of the stand with the cable colour of the speaker.
1.
✎
Installing the Speakers on the Tallboy Stand
Stand Pole
1
Stand Base
Tighten up the screws (large) (3.5x18, x3) as shown.
CAUTION
When you use a torque screwdriver, be careful not to put
excessive force. Otherwise, it runs idle or can be damaged.
(torque screwdriver- below 15 kg.f.cm)
3.
!
3
Fit the stand pole into the stand base.
(if they do not fi t with each other, the stand may get tilted from
an improper installation.)
2.
Stand Pole
2
Stand Base
HT-C9950W_ELS_0914.indd 25
HT-C9950W_ELS_0914.indd 25
2010-09-14 6:54:50
2010-09-14 6:54:50