English
41
05
Advanced Functions
CD Ripping
B
Converts audio sound of the CD into a MP3 fi le
format before sending to a USB storage device.
Connect the USB device to your product.
Insert the audio CD into the disc slot.
Press the
CD RIPPING
button.
To start ripping the current track, press the
CD RIPPING
button on the
remote control while the system
is playing a track or stopped
temporarily.
To rip the entire CD, press and hold
the
CD RIPPING
button on the
remote control.
-"FULL CD RIPPING" appears on the display
and ripping starts.
Press the
STOP
(
) button to stop ripping.
When the CD ripping is done, a directory
named "RIPPING" will be created in the USB
device and the ripped fi le will be saved in a
format of "SAM-XXXX”.MP3".
1.
2.
3.
•
•
4.
•
NOTE
Do not disconnect the USB connection or the
power cable during the CD ripping. Otherwise, it
may cause damage to the data. To stop CD
ripping, press the
STOP
button and disconnect
the USB device after the system stops playing
the CD completely.
If you disconnect the USB connection during
the CD ripping, the system will turn off and you
will not be able to delete the ripped fi le.
If you connect the USB device to the system
while it is playing a CD, the system stops
temporarily and will play again.
DTS-CDs cannot be ripped.
If the ripping duration is less than 5 seconds, a
ripping fi le may not be created.
CD ripping works only if the USB device is
formatted in the FAT fi le system. (The NTFS fi le
system is not supported.)
For a list of compliant devices, refer to the
specifi cation of the USB host.
The ripping is performed at a normal speed of
x3. The ripping time may be longer with some
USB devices.
While the system is ripping a CD, the audio
sound will not be output.
Do not put touch or move the system while it is
ripping a CD.
✎
D
CD RIPPING
HT-C750W-NO EUR_ENG-0420.indd 41
HT-C750W-NO EUR_ENG-0420.indd 41
2010-04-20 6:24:12
2010-04-20 6:24:12
