Samsung HT-AS700, Инструкция по эксплуатации

Страница: 48 / 55

Operating VCR (DVD) with
Remote Control
47
•
The remote control may not work on some brands of VCR (DVD)s. Also, some operations may not
be possible depending on your brand of VCR (DVD).
•
If you do not set the remote control with the code for your brand VCR (DVD), the remote control
work on a Samsung VCR (DVD) by default.
1 Press
MODE
button to make VCR indicator
on the remote control flash.
2
Press
POWER( )
button to turn on the
VCR (DVD).
3
Point the remote control toward the VCR
(DVD).
4
While holding down
POWER( )
button,
enter the code corresponding to your brand
of VCR (DVD).
•
If the code matches the VCR (DVD)'s code, the VCR (DVD) will
be turned off.
•
If there is more than one code listed for your VCR (DVD) in the
table, enter one at a time to determine which code works.
Ex)For a ‘Samsung’ VCR (DVD)
While holding down POWER( ) button, use the Numeric
button to enter 00, 32~45, 87, and 88.
•
If you operate DVD, press Device Select button to make DVD
indicator on the remote control flash.
•
You can use VCR (DVD) POWER, VOLUNE, PLAY, PAUSE,
STOP, SKIP and Numeric button (0~9).
5
If VCR (DVD) is turned on or off when you press
the power button of the remote controller, the
setting is completed.