Samsung HPP5581X/XAA, Руководство по обслуживанию

Страница: 5 / 57

2-1-1 SERVICE MODE Entry Method (General Transmitter)
■
Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote buttons in this order; POWER OFF-MUTE-1-8-2- POWER ON to turn the set on.
3. The set turns on and enters service mode.
4. Press the Power button to exit and store data in memory.
※
If you fail to enter service mode, repeat steps 1 and 2 above.
2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY
※
If you need customer setting reset, use only "RESET W/O CP".
If you use "RESET", in order to view the cable DTV with cablecard properly, let user go through subscrption process after
contacting user's cable service provider.
※
"T-CG55NUS0-1005" and "T-DTVUCOM5-1022(Boot 19)" are firmware version.
The firmware version is subject to change without notice.
2-1-2(B) Button Operations in SERVICE MODE
♣ ♣
While in Tuner mode, the direct access buttons can be used to select and change channels.
Menu Displays all menus
UP/DOWN Cursor moves to select items
LEFT/RIGHT To increase and decrease the data of the selected items
(ENTER)
Confirm your choice(Store OR Enter)
SOURCE button Change input source
Alignment and Adjustments
Samsung Electronics 2-1
2. Alignment and Adjustments
2-1 Service Mode
NTSC
UPD64083 WHITE BALANCE
SAA7119(M) FHP_LOGIC
SAA7119(S) RESET W/O CP
FLI2300 RESET
CXA2171Q
MST9883A
DNIe PRO
OPTION
T-CG55NUS0-1005
T-DTVUCOM5-1022(Boot 19)