Samsung HP-P5091, Инструкция пользователя

Страница: 12 / 84

12
◊ AUTO PROG. button
Automatically cycles through all of the available
channels and stores them in memory.
± ADD/DEL button
Adds or deletes channels in the TV’s memory.
≠ DNIe button
Activates DNIe (Digital Natural Image engine).
– SLEEP button
Selects a preset time interval for automatic shutoff.
— SET button
Sets up the Samsung remote control to work with
other devices (VCR, Cable Box and DVD).
Refer to page 46.
÷ S.MODE button
Selects the sound mode.
® P.MODE button
Adjust the PDP picture by selecting one of the preset
factory settings (or select your personal, customized
picture settings.)
∑ CAPTION button
Controls the caption decoder.
µ VCR, DVD control buttons
Controls VCR tape or DVD disc functions: Stop, Rewind,
Play/Pause, and Fast Forward.
¥
RESET button
If your remote control is not functioning properly,
take out the batteries and press the reset button for about
2~3 seconds. Re-insert the batteries and try using the
remote control again.
Installing the Batteries in Your Remote Control
1
Slide the back cover
to open the battery
compartment of the
remote control.
3
Slide the cover back into
place.
2
Install two AAA size batteries.
Make sure to match the “+”
and “-” ends of the batteries
with the diagram inside the
compartment.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the PDP’s remote control receiver.