ENDA EI141 PROGRAMMABLE INDICATOR
Thank you for choosing
ENDA EI141
Programmable Indicator.
SET
EI141
ENDA
P
ROGRAMMABLE INDICATOR
EI141
-
E
-09-160217
Order Code
:
EI
141
-
1 - Supply Voltage
230VAC...230V AC
24VAC.....24V AC
12VAC.....12V AC
SM...........9-30V DC /7-24V AC
1/3
SİSEL MÜHENDİSLİK ELEKTRONİK SAN. VE TİC. A.Ş.
Şerifali Mah.
Y.Dudullu 34775
ÜMRANİYE/İSTANBUL-TURKEY
Tel : +90 216 499 46 64 Pbx. Fax : +90 216 365 74 01
url : www.enda.com.tr
Barbaros Cad. No:18
ENDA
TM
Please read this document carefully before using this product. The guarantee will be invalidated if the device is damaged by not
following instructions detailed in the manual. The company shall not be responsible for any damage or losses however caused,
which may be experienced as a result of the installation or use of this product.
-
35x77mm sized.
-
4 digits display.
-
Easy to use by front panel keypad.
-
Display scale can be adjusted between -1999 and 4000.
-
Decimal point can be adjusted between 1. and 3. digits.
-
Measurement unit can be displayed.
-
Selectable four different standard input types (0-20mA, 4-20mA, 0-1V, 0-10V)
-
User can calibrate the device according to specified input type.
-
Sampling time can be adjusted in four steps.
-
Stores maximum and minimum measurement values.
-
The maximum or the minimum values can be hold on the display.
-
Current and voltage calibration can be performed.
-
Parameter access protection on 3 levels.
-
Easy connection by removable screw terminal.
-
CE marked according to European Norms.
TECHNICAL SPECIFICATIONS
ENVIRONMENTAL CONDITIONS
Height
Max. 2000m
Ambient
/
S
torage
T
emperature
Max.
R
elative
H
umidity
0 ... +50
°C/-25 ... +70°C (With no icing)
Rated
P
ollution
D
egree
80% Relative humidity for temperatures up to 31°C, decreasing linearly to 50% at 40°C.
According to EN 60529 Front panel : IP65
Rear panel : IP20
Do not use the device in locations subject to corrosive and flammable gases.
1
Supply
Power
C
onsumption
Max. 7VA
2.5mm² screw-terminal connections
Wiring
Date
R
etention
EMC
Safety
R
equirements
EN 61326-1: 2013
EEPROM (Min. 10 years)
EN 61010-1: 2010 P
( ollution degree 2, overvoltage category II, measurement category I)
ELECTRICAL CHARACTERISTICS
230V AC +10 -20 or 12/24V AC ±10 , 50/60Hz or optional
.
%
%
%
9-30V DC / 7-24V AC ±10% SMPS
EI141 Can not be used if measurement category II, III or IV is required.
While the current measuring mode, input impedance becomes 5
Ω
. Therefore, in current mode, the device must not be connected any
voltage input. Otherwise, the device is broken. While the device is running in the voltage measurement mode and if required to change
to current measurement mode, then firstly the voltage inputs must be removed and after that, input type must be changed to one of the
current measurement modes.
Input Type
0-1V DC voltage
0-10V DC voltage
0-20mA DC current
4-20mA DC current
Input Empedance
Approx. 11k
Ω
(terminal voltage limits: min. = -2V, max. = 30V)
Approx.
Ω
(terminal voltage limits: min. = -2V, max. = 30V)
11k
Approx.
Ω
5 (applicable terminal voltage is max. 50mA.)
Approx.
Ω
(applicable terminal voltage is max. 50mA.)
5
0V
±0,5% (of full scale)
0V
±0,5% (of full scale)
0mA
±0,5% (of full scale)
0mA
±0,5% (of full scale)
1.1V
14V
25mA
25mA
Min.
Max.
Measurement
R
ange
Measurement
A
ccuracy
HOUSING
Housing
T
ype
Suitable for flush-panel mounting according to DIN 43 700.
Dimensions
W77xH35xD71mm
Weight
Approx. 250g (after packing)
Enclosure
M
aterial
Self extinguishing plastics
While cleaning the device, solvents (thinner, benzine, acid etc.) or corrosive materials must not be used.
