Alignment & Adjustment
Samsung Electronics
3-17
3-4-4 ACTUATOR GAIN Adjustment
1. Before Adjustment
1) Turn off the power to put the unit into the STAND-BY mode.
2) In order to enter the Service Mode, Press "Mute"
→
"1"
→
"8"
→
"2"
→
"POWER" button on the Remote Control.
3) Select "Service" on the first display of the Service mode menu.
4) Press the
▲ ▼
(Up or Down) button to move to ACTUATOR GAIN1,2, then press ENTER to select.
2. Making Adjustments
1) As shown in the picture above, change the actuator values to eliminate saw tooth shapes.
- To fine tune, increase the data value ensuring that you get the center between the starting and ending points of the
disappearing saw tooth shape.
Actuator Gain
115
Before Adjusting
After Adjusting
- Actuator Gain1 : In case of controlling with Cross Pattern.
- Actuator Gain2 : In case of controlling with Crosshatch Pattern.
CROSSHATCH PATTERN
CAUSTION: GAIN2 is just controlled by your
eye because control value doesn’t
appear In picture.
Содержание HLR5078WX
