32
English
Hotel TV Function
Description
Category
Item
Initial value
Network
Network Setup
Set an IP address to establish an Internet connection.
Soft AP: Using this function, you can connect the TV on your mobile devices. Set
the options for connection of Wi-Fi device.
• Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile
devices can find the TV name in Wi-Fi connection list.
•
Security key: Set a security key that you need to enter on other devices so they
can connect to the TV.
‒
Input the generated security key into the device you want to connect.
‒ If network does not operate normally,check the security key again. An
incorrect security key may cause a malfunction.
✎
Soft AP may not be available if it is not supported by the model.
✎
Maximum number of devices that can be connected: 4 devices.
✎
Bitrate : 10 Mbps/device.
✎
The specifications above are based on our in-house testing. Actual performance
may vary depending on your wired/wireless network environment.
SmartHub Model
Setting
Set Smart Hub Model.
SmartHub Setting
Set up Smart Hub.
Service Discovery
On
If this option is set to On, you can share content with other devices, such as
smartphones, in DLNA mode.
Lan Out
OFF
Enable/disable LAN Out. When enabled, the TV can work as a wired router for
other network devices.
VLAN ID
...
Create separate VLAN groups. A 3-digit number can be entered between 1 and 255
for the VLAN ID.
Solution VLAN ID
...
When VLAN is used, set a VLAN ID to be assigned to a Solution (such as SYNC,
H.Browser etc.).
Device VLAN ID
...
Set a VLAN ID to be assigned to external devices connected to the LAN OUT port.
Widget
Solution
Widget Mode
ON
Widget Mode On/Off.
Solution Type
Vendor Server
Select type of solution (Vender Server/ SINC Server).
Server URL Setting
Set server URL.
License Server IP
Setting
…
Set server IP.
IPTV Mode
ON
IPTV mode On/Off.
Virtual Standby
OFF
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W
(Depending on the size of the TV screen).
Room Num Setting
Set Room Number.
Virtual
Standby
Virtual Standby
Mode
OFF
TV can supply the main feature in the standby mode if The TV mode is set to the
Virtual Standby mode.
• ON: The Virtual Standby mode is enable.
• OFF: The Virtual Standby mode is disable.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W
(Depending on the size of the TV screen).
Reboot Time
...
This Feature can set the Reboot interval of TV after TV enters Virtual standby
Mode.
