17
English
Connecting a Pillow Speaker
You can connect a pillow speaker to the TV in the hospital using a jumper cable. The speaker functions as a remote control
and speaker.
1.
Connect the pillow speaker jumper cable (cable sold separately) from the television's
PILLOW OUT
Port to the pillow
speaker jack on the wall behind the television.
Pillow Speaker Jack Specifications
y
Output jack: RCA type
y
Input jumper pin: 1/8" 3-conductor stereo phone pin.
y
Signal specifications: Tip-Audio, Ring-Data/Channel change, Sleeve-Common
Tip
Ring
Sleeve
VOL +
VOL -
1
2
3
How to Use the Pillow Speaker
y
Analog type speaker: The pillow speaker has one key.
–
Power On
: press the key when the TV is in standby mode.
–
Channel Up
: press the key when the speaker is on.
–
Power Off
: press and hold the key for more than 3 seconds when the speaker is on.
–
An Analog type speaker always works regardless of the Pillow Speaker Type value set in the Hospital mode
setup menu.
y
Digital type speaker: The TV supports the Samsung, Philips, or Zenith code.
–
This speaker is only compatible with a specified IR code. You can change the code in the Hospital mode setup
menu.
–
The TV gives priority to the Samsung remote control over the pillow speaker's wired remote control.
–
Option
: Channel Menu Display.
Pillow Speaker Type
Pillow Speaker IR Code
CZ
Zenith
CP
Pilips
CS
Samsung
Pillow Sound Control
Speaker Selection Menu
TV Speaker
Pillow Speaker
Main
Sound
Sound
External
No Sound
Sound
y
function is not supported in hospital models.
Pillow Volume
y
Pillow Volume change the setting about gain value of Audio amplifier to Low, Normal and High.
PILLOW
OUT
TV Rear Panel
Jumper Cable
Pillow Speaker
[Hotel-XC]Install Guide-ENG.indd 17
2012-03-30 �� 1:27:50
