32
English
¦
GENERAL INFORMATION
y
System Overview
The ‘Samsung Interactive Remote Control for Hospitality (SIRCH)’ application is a Remote Control Update system for the
better and cost effective service to Hospitality industries. This will allow user/operator to configure the guest TV with RF
distributing system. Application will help user to set and configure the guest room TV Set parameter. The created setting
file will get used by SRCUS for configuration of guest TV.
Application is intended to create or modify clone files for user and to update guest TV with these clone files by transmitting
them with RF. Application provides a user interface similar in appearance to TV’s parameter settings where user can
update factory menu settings and can modify or tune channels to update guest TVs.
To effectively complete and support the requirements of the “Hospitality” Industry, a management system is needed that
will allow the operator to have control of the TV sets in the guest’s room without requiring a potential disruptive or costly
visit to each room
–
Channel Configuration Made Easy All from the Head End FMA System.
–
Will configure and deliver the channel line-up and SW upgrade to the guest room terminals via the hotel’s
coaxial distribution.
This application is an S/W utility to configure user configuration parameter defined below:
–
Hotel Factory Menu (Standalone Menu/Interactive Menu)
–
Channel map
It also supports generation of TS stream embedding clone file information and control of the modulator which is used for
broadcast of TS stream.
y
Purpose of the Document
This document is prepared to facilitate and guide the user how to create/modify clone files, to update interactive/
standalone menu settings, to configure channel map and to create TS stream using SIRCH. Screens-wise explanations
are provided here in this document in the process flow of the application.
[Hotel-XC]Install Guide-ENG.indd 32
2012-03-30 �� 1:28:00
