SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
11-2
This Document can not be used without Samsung's authorization
5
6
7
1) Turn over PBA.
2) Separate below Key Connector.
1) In case of wish to separate PBA, first
unscrew 2 bolts and separate Connector.
1) Separate Connectors that are built to
PBA.
8
1) Separate Shieldcan from Clip by using
tweezers.
2) PBA separation picture reference.
1
2
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
3) Never separate Shieldcan besides SUB PBA
