
Assembling 11
2.
Plug the small end of the travel adapter into the
multifunction jack.
Important!:
Verify that the phone’s battery is correctly installed before
connecting the charger. If the battery is not properly installed and
the charger is connected, the phone might power off and on
continuously, preventing proper operation.
Note:
Improperly connecting the travel adapter can cause serious damage to
the phone. Any damage caused by misuse is not covered by the
warranty.
3.
Plug the large end of the travel adapter into a power outlet.
•
You can use the phone while it is charging, but it might take longer
to fully charge the battery.
•
While charging, the phone might heat up. This is normal and
should not affect your phone’s lifespan or performance.
•
If your phone is not charging properly, bring it and the travel
adapter to a Samsung Service Centre.
4.
When the battery is fully charged, unplug the travel adapter
from the phone and then from the power outlet.
Tip:
Do not remove the battery before removing the travel adapter. Doing this
can damage the phone.
Note:
Failure to unplug the wall charger before you remove the battery, can
damage the phone.
Charge with the PC data cable
To charge the battery using the PC data cable:
Before charging, ensure that your PC is turned on.
1.
Open the cover of the multifunction jack on the top of the
phone.
2.
Plug one end (micro USB) of the PC data cable into the
multifunction jack.
3.
Plug the other end of the PC data cable into a USB port on
your PC.
Tip:
Depending on the type of PC data cable you are using, it may take some
time before charging begins.
4.
When the battery is fully charged (the battery icon is no
longer moving), unplug the PC data cable from the phone
and then from the PC.