Call Functions 30
Putting a Call on Hold
You can place the current call on hold whenever you want. If your network supports this service, you can also make
another call while a call is in progress.
To place a call on hold:
1.
Press the
Options
soft key, highlight the
Hold
option, then press the
Select
soft key or
.
2.
Press the
Resume
soft key to reactivate the call.
To make a new call while a call is in progress:
1.
Press
Options
➔
New call
and press the
Select
soft key or
.
2.
Enter the new phone number that you wish to dial or press Search to look up the number.
3.
Press
Call
to call the second number.
When there is an active call and a call on hold, you may switch between the two calls by placing the current held
call to active and then placing the other call on hold.
To switch between the two calls:
1.
Press the
Options
soft key, select
Swap
, and press
. The current active call is placed on hold and the
call on hold is then reactivated so that you can continue conversing with that person.
2.
Press
when you are finished or want to end the call.
Using the Speakerphone
While on a call, you can use your Speakerphone by following these steps:
1.
Press the
Spkr on
soft key.
2.
To turn the Speakerphone off, press the
Spkr off
soft key.
Important!:
For safety information related to speakerphone use, see
“Responsible Listening”
on page 138.
t469.book Page 30 Friday, July 10, 2009 11:05 AM