Safety precautions
127
Do not distribute copyright-protected material
Do not distribute copyright-protected material that you have recorded to
others without the permission of the content owners. Doing this may violate
copyright laws. The manufacturer is not liable for any legal issues caused by the
user’s illegal use of copyrighted material.
Specific Absorption Rate (SAR) certification
information
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE
TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves (radio frequency electromagnetic
fields) recommended by international guidelines. The guidelines were
developed by an independent scientific organisation (ICNIRP) and include
a substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg.
Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands.
The highest SAR value under the ICNIRP guidelines for this device model is:
Maximum SAR for this model and conditions under which it was
recorded
Body-worn SAR
1.75 W/kg
During use, the actual SAR value for this device is usually well below the value
stated above. This is because, for purposes of system efficiency and to minimise
interference on the network, the operating power of your mobile device is
automatically decreased when full power is not needed for the call. The lower
the power output of the device, the lower its SAR value.
A body-worn SAR test has been performed on this device with an approved
accessory or at a separation distance of 0.5 cm. To meet RF exposure guidelines
during body-worn operation, the device must be used with the approved
accessory or positioned at least 0.5 cm away from the body. If you use an
unapproved accessory, ensure that the accessory does not contain any metal
components and that it positions the device at least 0.5 cm away from the
body.
