Samsung FX1600 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 76

background image

P

REFACE

FCC Information

The following information is only applicable to facsimile machines installed in the United
States of America.

Label Identification

This equipment complies with Part 68 of the FCC rules. On the rear of this equipment is a
label that contains, among other information, the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment. You may need to provide this
information for your telephone company.

Type of Service

This equipment is designed to be used on standard device telephone lines. Connection to a
telephone company-provided coin service (central office implemented systems) is
prohibited. Connection to party-line service is subject to state tariffs.

Telephone Company Procedure

The goal of the telephone company is to provide you with the best service possible. In
order to do this, it may occasionally be necessary for it to make changes in this equipment,
operation, or procedures. If these changes affect your service or the operation of the
equipment, the telephone company will give you notice in writing, to allow you to make
any changes necessary to maintain uninterrupted service.

If you have any questions about your telephone line, such as how many pieces of
equipment you can connect to it, the telephone company will provide this information
upon request.

In certain circumstances, it may be necessary for the telephone company to request
information from you concerning the equipment you have connected to your telephone
line. Upon request of the telephone company, provide the FCC Registration Number and
the Ringer Equivalence Number (REN) of the equipment that is connected to your line;

both of these items are listed on the equipment label. The sum of all of the RENs on your
telephone line should be less than five in order to ensure proper service from the
telephone company. In some cases, a sum of five may not be usable on a given line.

About Interference

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or

P

REFACE

i

«
...
2
3
4
5
6
...
»

Содержание FX1600













































































Отзывы:

Нет отзывов

Похожие инструкции для FX1600

Бренд: U.S. Products Страницы: 12

Бренд: Sinbo Страницы: 48

Бренд: Numatic Страницы: 28

SQF-200 SquareFolder

Бренд: Plockmatic Страницы: 85

Бренд: Necci Страницы: 39

Бренд: Singer Страницы: 39

Бренд: JUKI Страницы: 50

Бренд: JUKI Страницы: 72

Бренд: JUKI Страницы: 52

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды