Cooktop Auto check program (FE-N300/500)
1. Hold down DUAL ON pad for 3 seconds.
2. Hold down Hi pad of Rear-Left burner for 3
seconds.
3. Auto check program for Cooktop part will start.
4. If Cooktop part has a problem, auto program will
stop and display the corresponding error code
Oven Temperature Calibration
The temperature of the oven has been preset at the factory. In case of the
oven being too hot or too cool, the temperature of the oven can be adjusted.
The oven temperature can be adjusted
±35°F (±19°C ).
To adjust the oven temperature, follow the below procedure:
1. Hold down BAKE and “0” key simultaneously
for 3 seconds, the display will show AdJ 0.
2. Enter the adjustment that you want, (eg. Add /
subtract 30
°F), by using the number pad.
Press the BAKE key for +/- sign.
3. Press the SET/START KEY to finish.
Test Mode List
Fahrenheit or Celsius temperature display selection
The oven temperature can be displayed in either Fahrenheit or Celsius.
The default display is in Fahrenheit.
To change the display from Fahrenheit to Celsius or from
Celsius to Fahrenheit, follow the procedures below:
1. Hold down BROIL & “0” key simultaneously for 3 seconds.
The display will flash F (Fahrenheit) or C (Celsius).
2. Press “0” key to switch display between F and C.
3. Press the SET/START key to finish.
