06
TROUBLESHOOTING
Troubleshooting _
63
PROBLEM
POSSIBLE CAUSE
SOLUTION
Display flashes.
There was a power failure.
Reset the clock.
•
Drawer does not
slide smoothly or
drags.
The drawer is out of alignment.
Fully extend the drawer and push it all the
•
way in. See the page 57.
The drawer is over-loaded or the
load is unbalanced.
Reduce weight. Redistribute drawer
•
contents.
Warming drawer will
not work.
A fuse in your home may be blown
or the circuit breaker tripped.
Replace the fuse or reset the circuit
•
breaker.
The controls are not set correctly.
See the chapter on using the warming
•
drawer on page 27.
Excessive
condensation in the
drawer
There is liquid present in the
drawer.
Remove the liquid.
•
Uncovered foods.
Cover food with a lid or aluminum foil.
•
The temperature is set too high.
Adjust the temperature to a lower setting.
•
Food dries out in
the warming drawer.
Moisture is escaping.
Cover food with a lid or aluminum foil.
•
The drawer is not fully closed.
Push the drawer in until the latch engages.
•
FTQ307NWGX_XAA DG68-00228A.indd 63
2009-06-30 1:55:09