background image

17

Before installing the product (Installation 

guide)

This product can be wall-mounted. The exclusive Samsung stand (for 

WM55B

) and wall 

mount (for 

WM65B

) are available for optional purchase.

 

"

Do not install or use the product with its front facing up. Touch-based functions may not 

work properly.

WM55B

Rotation

 

"

Contact Samsung Customer Service Center for further details.

•  To use the product in landscape mode, turn it anticlockwise and make sure the power 

indicator is on the right after turning.

Ventilation

 

"

Contact Samsung Customer Service Center for further details.

Installation on a perpendicular wall

Minimum 15 mm

Ambient temperature: 95 °F (35 °C) or less

 

"

When installing the product on a perpendicular wall, allow at least 15 mm of 
space between the product and wall surface for ventilation and ensure that 

the ambient temperature is kept below 95 °F (35 °C).

A

B

Installation on an indented wall

Minimum 15 mm

Minimum 25 mm

Ambient temperature: 95 °F (35 °C) or less

 

"

When installing the product on an indented wall, allow at least the space 

specified above between the product and wall for ventilation and ensure 
that the ambient temperature is kept below 95 °F (35 °C).

B

B

C

A

Содержание Flip WM55B













































































Отзывы: